There are a lot of users who are going to guide you with a number of ways to set up a router. The more the number of people, the more are going to be different ways. Although you may not need to hire a professional as well to set up a router.
Well, with the help of this article, you can do the job by yourself. These are the basic steps that you can follow that will help you to power on your device. This setup guide is going to work for most of the brands that are in the market.
This setup guide is recommended for the users who are trying to set up a router in their homes.
Before you begin to set up your product, make sure that you are keeping your product at a place which is in the center. The central location in your home must be the permanent place of the router.
The wireless router must be placed this way because of the Wi-Fi signals from the router is to be used by all the members in the family. The location is going to provide the best open source vs Closed source network for everyone to use it.
When you have purchased a router, the items in the Router box will include:
● A router
● Power cord
● The installation disc
● Manual guide
● Ethernet cable
You must make sure that you have all the components for the process of the router setup. Also, make sure that your computer is connected to the internet. Make sure you know where your router is so that you can connect it to your router.
After inserting the installation disc, make sure that you are following the steps that are mentioned below. Sometimes, you might be using a laptop and there is no disk drive. In that case, you can download the drivers from the website.
Customizations for the router setup
There are many users who are going to prefer a more customized approach when it comes to the setup. If you are looking for the best results, then you must meet these requirements in order to connect your router.
These steps are used for a router setup and for the router that needs to be installed without a disc:
● Power on:
In order to attach the router, you need to plug one end of the power cord into the back of the router and the other one into the power outlet. If you want to safeguard your device, make sure that you are using a GFCI protector of a power-strip in order to do that.
After switching on the router, wait for the router to get power on completely.
In the case when you are using a used router, then you need to rest it after switching it on. Reset the paper clip in the reset pinhole and then hold it there until the light starts to flash.
● Connect your router to a modem:
Although the latest routers are going to use USB connections, there are still some routers that are going to use an ethernet cable. It does not matter what connection type your device is coming with, you need to put one end of the ethernet cable in the modem that you are using in your home and the other in the back of the router.
The port in the router is going to be labeled as WAN or the internet. After this, you have to unplug the ISP’s modem and then wait for a minute. Plug it back before moving to the step.
● Connect your PC or laptop:
Now it’s time to attach another ethernet cable from any of the available slots to the new router and then into the ethernet port on your PC or laptop. When you are following this step, make sure that disabling the Wi-Fi on your computer for this step.
This is because so that your pc or laptop is connected to the router before it is ready to setup.
The users who are using a laptop and do not have an ethernet port on it can keep the Wi-Fi On. after this, you need to connect your router to the default network settings that are provided in the documentation by the manufacturer. After this, you can proceed to the next step.
● Log in as an administrator:
When you are going to access the dashboard of a new router, then make sure to open the browser window on your laptop or the computer.
After opening the browser, you need to type in an IP address that is common in all the router setup. If you are unaware of that IP, you can check the manual and you will find it.
The addresses are the same most of the time but if you find something other than what is commonly used, then use what is written in the manual.
Then you are going to be asked where to enter the ID and the password for the setup. That is also included in your manual only. Read the manual properly for the router setup. After setting up of the router, make sure that you are changing the password for security reasons.
● Provide your connection information:
The next process includes the information that you need to write regarding your connection type. The exact location is can be anyplace according to the type of router that you choose. You can even check the manufacturer’s website to see the frequently answered questions.
These questions are going to give you the clarity of the details regarding the mobile connection or any issue that you might have.
If you are unaware of this, your internet service provider is going to provide you with the information including the static IP address and the gateway address, etc.
You can also update your MAC Address around this time is your internet service provider is using the one to authenticate your device. Your MAC address is printed on the bottom of your system, in case you have never saved it from your old router.
You can the MAC addresses in your router dashboard screen and can be updated easily.
● Verify local internet connections:
You need to ensure that your PC is communicating with your router. Make sure that your router can access the internet by using the option of a test connection. This can be found on your router settings dashboard.
In different brands, the option is located in different places. If the router is getting connected to the internet, then you will be able to open a tab and visit any of your desired websites.
● Make it wireless:
When your router is online and you can use the internet on your PC via internet cable, now it is time to start using it from your Wi-Fi Connection. For this, you need to follow the below-mentioned steps.
● Firstly, disconnect the cord that is going from your router to the computer.
● After that, turn the wireless adapter back on
● Look for the SSID of the router.
If your router is working with a default password, then you need to get that from the documentation or the manual itself. This password is also denoted by “Network key”.
Check whether or not, your device is getting connected online. If it is then you are good to go and can browse the internet freely. Make sure that all your smartphones and tablets can get access to the Wi-Fi. This means that the process of the router setup is complete.
This is the best time to place the router at a central location in your home where all your devices can catch the Wi-Fi signals sitting at any corner of the house.
● Additional security features must be included:
Follow the steps in order to get extra protection for your home network.
● Change the SSID and your home network can be named anything other than the default name. You can change the name to something that you only can recognize and others cannot.
● Then switch on the WPA and WPA 2 encryption.
● The next step is where you can enable firewalls and anti-virus software on all the devices connected to the Wi-Fi.
● The last step to secure the router’s default ID and password by changing are to somewhat you and your family members only know.
Conclusion:
Setting up a router can be a challenging task when you do not know what you are doing. In most cases, the average tech-savvy user will be able to set the router and manage everything alone.
If you are looking for help for router setup, then you can get in touch with your internet service providers. Hence, these are the by which you can set up your router and enjoy your Wi-Fi services.
Suggested Read:
